|
Post by Alex Carter on May 12, 2014 17:20:53 GMT -5
Just built myself a practice table except for the handed. Can't figure out what or how to get em on. What have you guys used ?
Sent from my iPhone using Tapatalk
|
|
|
Post by Allan Rivers on May 12, 2014 21:06:11 GMT -5
In this video they show some basic piping you can find in a generic home improvement store. Hope this helps.
|
|
|
Post by Kyle Lombardo on May 12, 2014 22:13:10 GMT -5
Thanks for posting the video Alan!! Really good video with some helpful tips!
|
|
|
Post by Alex Carter on May 12, 2014 22:24:26 GMT -5
Thanks I'll have to try and find something like that
Sent from my iPhone using Tapatalk
|
|
|
Post by Kyle Fitzpatrick on May 13, 2014 9:27:30 GMT -5
alex - just go get yourself a couple of 3/4" floor flanges from your local hardware store, two 3/4" threaded nipples that are 5 1/2" in length, and two 3/4" caps. also get a can of some hardcore thread glue like permatex (pipe joint compound). then get a handful of some hardware (nuts, bolts, washers and lock-washers) that are long enough to go through your table top and work with the floor flange. slap it all together and you're set. if you're going to paint, make sure to use a primer first and then paint it before installing. have fun dude.
ps- here's another vid for reference:
|
|
|
Post by Allan Rivers on May 13, 2014 13:14:35 GMT -5
I'd like to know if the bases are ordered, or work shopped. It'd be kick ass if we could get a video on how to build a base without having to weld.
|
|
|
Post by Alex Carter on May 13, 2014 14:29:14 GMT -5
Awesome, thanks Kyle.
Sent from my iPhone using Tapatalk
|
|
|
Post by Alex Carter on May 13, 2014 16:46:32 GMT -5
I just used 2x4's for my practice table. No welding needed. I'll try and post a picture of it
|
|
|
Post by Alex Carter on May 13, 2014 17:12:53 GMT -5
IMG_9414.jpeg
|
|