Jim Roof
Full Member
Edinboro PA
Posts: 46
|
Post by Jim Roof on Jan 23, 2012 20:32:05 GMT -5
I'm new to the sport and want my own table,I've looked at every table available online and I don't want to buy a piece of crap that won't last. I downloaded the mazurenko catalog (no pricing),and haven't received any response from the 6 emails I've sent,I also looked at aplin tables from australia,and again no response from them either. I would love to have a hirst custom but don't know how to get ahold of him,I've heard nothing but awesome things about his tables,and want a personalized one very bad........please help
|
|
|
Post by Gabe Moore on Jan 23, 2012 20:36:35 GMT -5
Jim Coyle in Oklahoma makes some really nice quality tables. We'll use them at TX State this year....in fact, I'm buying one of them after the tourney! Last year, after pulling on his tables at one of the tourneys, I was sold. From the simplicity of taking it apart (if you need to travel), to switching lefty/righty, its one of the best I've pulled on. If you need his info, just send me a pm.
|
|
Jim Roof
Full Member
Edinboro PA
Posts: 46
|
Post by Jim Roof on Jan 23, 2012 20:45:06 GMT -5
I just left u a msg with my phone number,now I'm getting amped up and can't wait to talk to you prez!
|
|
Jim Roof
Full Member
Edinboro PA
Posts: 46
|
Post by Jim Roof on Jan 23, 2012 22:42:37 GMT -5
Thanks gabe,I appreciate your help,but I'm sold on the hirst tables buddy! You should post some pics of your table when u get it so we can check it out:)
|
|
|
Post by D.J. Lee on Jan 24, 2012 4:08:19 GMT -5
Hirst Tables all the way! *fist pump*
|
|
|
Post by Rick "Lummox" North on Jan 24, 2012 9:13:10 GMT -5
If your not pulling on "The Prez's" table you might as well pull on...yourself!
|
|
|
Post by John Cervantes on Jan 24, 2012 9:17:46 GMT -5
Nothing beats a prez table..... That's all I gotta say!!!!
|
|
|
Post by Kurt Howgate on Jan 24, 2012 15:08:33 GMT -5
If you are looking for a custom-themed table...then Frank Hirst is the man, hands down.
|
|
Jim Roof
Full Member
Edinboro PA
Posts: 46
|
Post by Jim Roof on Jan 24, 2012 20:42:09 GMT -5
You guys r right,ten minutes after I posted this thread I was on the phone with prez ironing out the details for my table,I've seen a lot of his tables on line but not in person,and all I gotta say is if his tables are as good as his customer service I'll b a customer for life! Hey frank I'm pooling some cash from all of our guys to get another tablr for practices at barts,after I get my table we r gonna want another one bud!
|
|
|
Post by Brendan Downes on Jan 25, 2012 1:16:14 GMT -5
I priced a mazurenko table a few months back..was gonna cost around $500 which I thought wasnt too bad..the shipping to australia another $570..couldnt do it. I bought an Aplin table and can honestly say they are crap! They are flimsy, super light and rock all over the show. And he sells them for over $600US.
Ive got a strongman equipment fabricator looking into making us some over here....
|
|
|
Post by Marcin Mielniczuk on Jan 25, 2012 1:56:01 GMT -5
if you are looking for contact with Mazurenko - just email me at marcin@mazurenko.pl or leave message on this message board (PM).
|
|
|
Post by Ron Klemba on Jan 25, 2012 13:55:47 GMT -5
I have been unable to get frames for a while but have ten frames on the way and some tops ready if anyone is stuck. 3beans plus ship. regulation and very durable.
|
|
|
Post by Steve Pettis on Jan 26, 2012 12:54:40 GMT -5
Check out www.michiganarms.com George makes the best tabels on the planet. No and I mean no one can make a table like George. These tables have been used all over the midwest, Harley Pull. Even Canadian National championships. Check him out. www.michiganarms.com
|
|